Acreo

Acreo Uses VSS to Successfully Optimize System Performance of Complex UWB Transceiver
VSS gives us a deeper understanding of system aspects. Its flexibility and open platform means parameter optimization can quickly and easily be done. With VSS we were able to successfully realize our system.
Lars Pettersson
Research Engineer
Acreo

Acreo Uses Visual System Simulator to Successfully Optimize System Performance of Complex UWB Transceiver

Design Challenge 

The need for higher capacities within Internet infrastructure is driving the demand for network architectures capable of supporting 100Gb/s Ethernet (IP) based traffic. One such bandwidth-efficient technology being explored is sub-carrier multiplexing (SCM), where quadrature modulated (QAM) signals on different carrier frequencies are combined and subsequently encoded onto an optical carrier. This transceiver approach capitalizes on the increasing speed of silicon technology (65nm complementary metal oxide semiconductor CMOS process on HR-SOI substrate) to perform more of the signal processing in the electrical domain before converting to light.

Solution: What design problem did AWR's software help you to solve?

We needed to create a SCM transceiver link suitable for 100Gb/s transmission. The system-level development of a SCM transceiver link was modeled within AWR's Visual System Simulator. This RF system model enabled us to assess the influence of component performance in the electrical domain, particularly non-linearity and noise, with respect to the SCM link performance requirements. The design of critical component building blocks in the 65nm CMOS SOI process such as IQ modulators, power combiners, and low noise amplifiers (LNAs) for the SCM transceiver, were done at the circuit level. The performance of these components was then assessed in the VSS system simulation environment to investigate the capabilities of CMOS for next generation optical networking with the SCM architecture.

"Using Visual System Simulator together with Matlab® to create the RF system model proved to be a straightforward task." said Lars Pettersson, research engineer at Acreo. "The flexibility, ease-of-use, and open platform of Visual System Simulator was a very positive feature. Visual System Simulator gave a good understanding of how group delay variations affected the whole system performance and we were able to optimize the system using this knowledge."

To continue to read the full story, click to download the PDF document below...

Related customer stories

AWR Analog Office has provided the Epicom design team with a unified, easy-to-use, and fully integrated RFIC design suite, which enabled us to obtain our complex RFIC silicon tape-out on a short schedule.
Cindy H. C. Yuen
Vice President of Engineering
Epic Communications
Read story
VSS has increased my productivity by providing more accurate results while at the same time cutting design cycle time. The software offers an intuitive design flow that has allowed me to quickly evaluate modulation schemes and radio/RF/DSP architectures, and has helped us optimize our system engineering design flow.
Sy Prestwich
Vice President & Co-founder, Chief Scientist
S5 Wireless (now part of Recon Dynamics)
Read story
The integrated flow between the Mentor and AWR tools has enabled us to significantly cut our design times. By concurrently designing the RF circuits in the context of the rest of the PCB, we can also reduce our design and manufacturing re-spins, which helps us meet aggressive time-to-market goals
Xavier Leblanc
Hardware Tools Manager
Alcatel-Lucent
Read story