TMYTEK
TMYTEK Cuts Design Time for mmWave RF Front-End Components
AWR software is a very useful tool that helps us in each phase of a design project. It has many good technologies that streamline our design process.
Su-Wei Chang
Founder and President
TMYTEK
TMYTEK Cuts Design Time for mmWave RF Front-End Components
Key Challenges
The 5G New Radio (NR) millimeter-wave (mmWave) standard, unlike previous ones, uses dynamic beam steering to maximize connectivity by aiming as much of the signal directly to the mobile device as possible. As a result, beamforming antennas represent a new area of development for many commercial manufacturers. TMYTEK uses the AWR Design Environment platform to develop RF front-end components in its groundbreaking BBox™ beamformer box product line, a highly modulized 28/39GHz beamforming system that enables 5G designers to successfully develop innovative antenna designs and baseband technology.
The Solution
The designer had used the AWR Design Environment platform as a graduate student and was familiar with the specialized technologies within the software for filter and phased-array antenna design, making it the right choice for his current project.
To continue to read the full story, click to download the PDF document below...
Related customer stories
We chose AXIEM because of its speed, capacity and accuracy. It enabled us to shorten our design process. AXIEM helped us deliver a higher performing antenna product in less time while also reducing design and manufacturing costs.
Shinichi Goto
Design Manager
Toshiba
Read story
Collaboration of antenna design with RF front-end module design, on a common Microwave Office platform, enabled breakthrough success of this project.
Juha Ellä (left) and Prasadh Ramachandran (right)
Principle Scientist - Senior Research Engineer
EPCOS and Pulse Electronics
Read story
The advanced AWR Design Environment platform provides us with a flexible platform for our antenna solution design needs. We can rely on the accurate models and trust the simulation results, which leads to fewer design spins. With Microwave Office we are able to accurately design our complex products and get them to market faster.
Kimmo Koskiniemi
Engineering Group Manager
Pulse Electronics
Read story